Putty Xmodem File Transfer Software
Putty Xmodem Upload
Putty And Xmodem

This procedure assumes that:

Download ExtraPuTTY for free. ExtraPuTTY - fork of putty 0.67. (Add win32 API,shortcuts for pre-defined command,can use files instead of the registry,auto-reconnect, scripting a session with lua,integrates FTP,TFTP,Ymodem,Xmodem transfert protocols, integrates cygwin, zmodem, session manager,hyper link projects and others.). ExtraPuTTY is a fork of PuTTY that adds XMODEM and a few other file transfer protocols. Furthermore, what replaced HyperTerminal in Windows 10? If you need a good HyperTerminal program for Windows 10, then this is your best option.

ZMODEM YMODEM YMODEM-G YMODEM/BATCH XMODEM-1K XMODEM XMODEM/CRC KERMIT Extended XMODEM ASCII - AS511 3964R RK512 LSV/2 MODBUS SuperCom breaks the limits in fast and reliable data communication and file transfer. It includes nearly all known standard file transfer used in serial communications. PuTTY is the CIT-recommended application for secure file transfer using SCP between Windows clients and Windows or Unix servers. Its secure copy utility is called PuTTy Secure Copy Protocol (PSCP). PSCP and PuTTY are available from PuTTY.org. Install PuTTY SCP (PSCP). Then in your terminal emulation program start the transfer. In teraterm it is under the file menu, while secure CRT has a whole menu structure dedicated to various methods to transfer files. Simple chose the xmodem protocol (I found selecting the 1K option was more reliable), and browse to the configuration file, and away it goes.

The switch is connected via the Console RS-232 port to a PC operating as a terminal. (For information on connecting a PC as a terminal and running the switch console interface, see the Installation and Getting Started Guide you received with the switch.)
The switch software is stored on a disk drive in the PC.
The terminal emulator you are using includes the Xmodem binary transfer feature. (For example, in the HyperTerminal application included with Windows NT, you would use the Send File option in the Transfer drop-down menu.)

Downloading to Flash using Xmodem and terminal emulator

Syntax

Downloads a software file to primary or secondary flash. If you do not specify the flash destination, the Xmodem download defaults to primary flash.

Example

To download a switch software file named E0822.swi from a PC (running a terminal emulator program such as HyperTerminal) to primary flash:

Putty Xmodem File Transfer Software

Putty Xmodem Upload

Execute the following command in the CLI:
Execute the terminal emulator commands to begin the Xmodem transfer. For example, using HyperTerminal:
1. Click on Transfer, then Send File.
2. Type the file path and name in the Filename field.
3. In the Protocol field, select Xmodem.
4. Click on the button.
  The download can take several minutes, depending on the baud rate used in the transfer.
When the download finishes, you must reboot the switch to implement the newly downloaded software. To do so, use one of the following commands:
Syntax
Reboots from the selected flash
Syntax
reload
Reboots from the flash image currently in use
To confirm that the software downloaded correctly:
Check the Firmware revision line. It should show the software version that you downloaded in the preceding steps.

NOTE: The menu interface accesses only the primary flash.

Putty And Xmodem

From the console Main Menu, select
Press [E] (for Edit.)
Use the Space bar to select XMODEM in the Method field.
Press [Enter], then [X] (for eXecute) to begin the software download.
The following message appears:
Press enter and then initiate Xmodem transfer from the attached computer.....
Press [Enter] and then execute the terminal emulator commands to begin Xmodem binary transfer.
For example, using HyperTerminal:
1. Click on Transfer, then Send File.
2. Enter the file path and name in the Filename field.
3. In the Protocol field, select Xmodem.
4. Click on the [Send] button.
The download then commences. It can take several minutes, depending on the baud rate set in the switch and in your terminal emulator.
After the primary flash memory has been updated with the new software, you must reboot the switch to implement the newly downloaded software. Return to the Main Menu and press [6] (for Reboot Switch.) You then see the following prompt:
Press the space bar once to change No to Yes, then press [Enter] to begin the reboot.
To confirm that the software downloaded correctly:
1. From the Main Menu, select
  1. Status and Counters
2. Check the Firmware revision line.